VNTZilla – Hella 3 Actuator Controller

$220.00

VNTZilla – Hella 3 VNT Actuator Controller – Td5 and Universal Fit This standalone controller drives the Hella electronic VNT actuator on a GTB2260VK turbo. It’s designed around the Td5 but can be fitted to…

Not sure this suits your vehicle? Contact us before you order.

Description

VNTZilla – Hella 3 VNT Actuator Controller – Td5 and Universal Fit

This standalone controller drives the Hella electronic VNT actuator on a GTB2260VK turbo. It’s designed around the Td5 but can be fitted to any vehicle. It measures boost and positions the vanes to hit your target, working like a wastegate. You can tune it live and log data over USB with the VNTZilla desktop app.

On a Td5, it reads the boost target straight from the ECU. For boost measurement, it can be calibrated to read your vehicle’s existing MAP sensor, as long as it has a 5V output. If your vehicle doesn’t have one, it has its own built-in 5 bar MAP sensor.

IMPORTANT: suits Hella electronic VNT actuators (REA / Universal Turbo Actuator) set up for PWM control. Wiring: pin 1 +12V, pin 2 0V, pin 4 PWM signal. Actuators set up for CAN only must be reconfigured for PWM first. Not compatible with the Hella SREA (simple actuator).

Features

  • Drives the Hella electronic VNT actuator directly with a 300 Hz PWM signal
  • Designed for the Td5 and fits any vehicle
  • Built-in 5 bar MAP sensor (NXP MPX5500DP), no external sensor needed
  • Input for an external MAP sensor if your vehicle already has one
  • Td5 ECU boost target input (Td5Zilla Mapped ECU’s only)
  • Wastegate-style control with adjustable spring open/full points, slew ra
  • Live tuning, gauges and CSV data logging over USB with the VNTZilla desktop app
  • Settings save automatically on the controller
  • 3.5 mm screw terminals: 8-way for inputs and power, 3-way for the actuator

Fits

  • Any vehicle with a 12V supply and a Hella electronic VNT actuator.
  • Land Rover Defender Td5 and Discovery 2 Td5 GTB2260VK conversions

Included

  • 1 x VNTZilla Hella 3 controller
  • VNTZilla desktop app

Fitting notes

  • Needs a switched 12V supply and a good shared ground with the actuator (and the ECU on a Td5).
  • If you’re using the built-in MAP sensor, run a boost hose to sensor port P1 and leave P2 open to air intake.
  • Mount the board away from heat and water.
  • Check the actuator moves its full range with the VNTZilla app before driving.
  • Professional fitting is recommended.