Process Overview
1. ECU Check
Before anything else, confirm which ECU your Td5 has. Check the part number on the ECU label — it needs to start with NNN. The ECU sits under the driver’s seat on the Defender, and under the bonnet on the Discovery 2.
An NNN ECU is directly flashable through the OBD port using MapZilla. No hardware modification, no soldering, nothing to send away.
If your label doesn’t start with NNN, get in touch before going any further and we’ll point you in the right direction.
2. Get Your Map
Three things to get sorted at this stage before any logging or flashing can happen.
Purchase a map — we offer remote and in-person tuning. Remote tuning is done entirely by file exchange. In-person means bringing the vehicle to us directly. Tuning packages are available through the Td5Zilla website.
Cable — you will need a KKL 409.1 OBD2 USB adaptor. This is the interface MapZilla uses to communicate with the ECU. It must be the KKL 409.1 variant — generic adaptors using different chipsets will not work.
Purchase the KKL 409.1 OBD2 USB Adaptor on Amazon →
MapZilla — our MEMS-style interface handles ECU reading and writing, live data logging, fault diagnostic management and more. Download it from the Td5Zilla’s website and install it on a Windows laptop — this is the machine you will use for all logging and flashing.
3. Gather Your Data
Once your purchase is confirmed you will receive a MapZilla Information Request Sheet. Fill this out covering your engine variant, current modifications, how the vehicle is used, and any known issues. The more accurate and complete this is, the better the tune we can build.
Using MapZilla and your KKL cable, obtain the ecu key and take a log of the vehicle running. The log should cover a range of conditions — idle, light throttle, and a full-throttle pull where it is safe to do so.
Send the completed information sheet and the log file to Td5Zilla.
4. Analysing Your Data
Td5Zilla’s reviews the log and information sheet in full. Based on what we find, we will either send you a base map to proceed with, or come back to you with issues identified in the data that need attention first.
Not every issue will hold up the tuning process — some are informational and we will advise accordingly. Where something does need to be resolved first, we will be clear about what it is and why it matters.
5. Mapping Time
Upload the base map to your ECU using MapZilla. Drive the vehicle across the conditions that matter most to you — daily use, towing, off-road, or a mix — and take a new log.
Send that log back to Td5Zilla along with your feedback on how the vehicle feels. Be as specific as you can about where it feels strong, where it feels flat, and how it responds under load. Your real-world feedback at this stage is just as important as the log data.
6. Final Adjustments
Using your feedback and the log from Step 5, we produce your final custom map. Upload it to the ECU using MapZilla, then take one last log under normal driving conditions and send it to us.
This final log confirms the tune is performing as intended on your vehicle and closes out the process.
